Learning Outcomes

Introduction to Seven Quality Tools (7 QC Tools)

The Three Primary Quality Statistical Tools

Lesson Summary

This module provides a brief overview of the seven basic quality tools. It also presents some important discussions on its history and achievements through it. The module also covers some of the seven quality tools in detail. The tools covered in detail are Check-sheets, Histograms and Scatter diagrams. You will also be shown how to apply the tools using examples and illustrations where applicable.

Essential Statistical Tools - Part 1

Essential Statistical Tools - Part 2

This module explains the remaining seven quality tools with a brief discussion. It also covers the remaining seven quality in detail. The tools covered in detail are Stratification, Control Charts, Fishbone Diagrams and Pareto Analysis. The detail part covers the application areas, steps to apply the tools, example illustration and types where applicable. The module also covers some important discussions on Minitab, Flow-charts, Run Charts and association of 7 quality tools with ISO standards.

The Seven Basic Quality Control (7 - QC) Tools - Course Assessment

In this free 7 qc tools course learn about the 7 quality control tools like check-sheet, histogram, scatter diagram etc

The Seven Basic Quality Control (7 - QC) Tools

This free online 7 quality control (QC) tools training course explains the seven basic quality tools used in statistics widely used in the management system of organizations for monitoring, measurement, analysis, and evaluation. You will learn how to use a check-sheet, histogram, scatter diagram, and Pareto analysis to study the current state of your organization and take actions to improve the quality of processes, plus more!

In this free online course The Seven Basic Quality Control (7 - QC) Tools you will learn about the seven quality tools that provide the basic framework to record, report, document, monitor and analyze data. The processing of data through these tools creates valuable information for an organization. This information acts as a gateway for different actions that ultimately make a business competitive. The actions lead to different types of improvement, and any improvement through these actions can be re-validated using these quality tools. The fundamental tools you will learn about are check-sheet, histogram, scatter diagram, stratification, control chart, fishbone and Pareto analysis. Run charts and Flow charts are also discussed.
The course begins with an introduction to these quality tools. Then it discusses the Check-sheets tool along with its application areas and the steps required to prepare it. The second quality tool called the Histogram is highlighted with examples. The course then covers the Scatter Diagrams and Stratification quality tools. The fifth quality tool covered is the Control Chart, which is also known as the process-behaviour chart.  Next, the Fish-bone Diagrams quality tool is covered along with an illustrative example. The seventh quality tool called the Pareto Diagram is the final tool covered by the course. 
If you work in Quality or Continuous Improvement departments, considering working in quality control as a future career, or if you’re a professional seeking to learn about the different quality tools, then this clear and simple course is for you. Understanding these core seven quality tools is of vital importance for all professionals working in any industry. So, start this free online course today and in just 3 hours you’ll be acquainted with the seven quality tools.

7 Best Autodesk Maya Courses for 2025: Exploring 3D Animation

6 Best Site Reliability Engineering Courses to Take in 2025

Coursera and Udemy are Finally One. What’s Next?

7 Best Technical Writing Courses to Master Documentation and Communication

The Rise of AI Search: ChatGPT Surpasses DuckDuckGo, Threatens Bing

9 Best Quilting Courses for 2026: Turn Fabric Scraps Into Heirlooms

Coursera Growth Stalls, Leadership Changes as Stock Hits All-Time Low

Coursera’s 2025 Strategy: Focusing on Campus, Scaling Back Degrees

Learn Something New: 100 Most Popular Courses For December

freeCodeCamp’s Responsive Web Design (Free) Certification Is Out of Beta

Medical Education Platforms with 800 Free Certificates & CME Credit

262K Courses, 833M Enrollments: Breaking Down Udemy’s Massive Catalog

Chinese Edtech Pivots: Well-rounded Education, Hardware, Agriculture E-commerce, Fast-Food, Garments, and More

[2025] 470+ Hours of Free LinkedIn Learning Courses with Free Certification

Udemy Announces Layoffs Without Saying ‘Layoffs’

25% of Coursera Courses Have Peer Reviews: Here Are the Best

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.